Tnfeeon Goldwing Bluetooth Adapter ABS A2DP Audio Adapter Bluetooth 5.0 3 Pin AUX Plug and Play Hi Fi Streaming for GL1800 Motorcycle Riders

About This

• Plug and Play Setup: This goldwing bluetooth adapter connects through the factory CD changer port for GL1800. No wire cutting or splicing needed, keeping the original dash layout unchanged.
• Wireless Audio Streaming: Supports A2DP Bluetooth 5.0 for motorcycle bluetooth audio from phones and other devices. Stream music podcasts and navigation audio without AUX cables while riding.
• Hi Fi Sound : Using a direct harness connection to the stereo, this adapter helps reduce the static often found with FM transmitters and delivers clear audio through factory speakers.
• Made for GL1800 Riding: Designed for riders who want wireless music on long trips or daily routes. It adds bluetooth streaming to the existing stereo without replacing the head unit.

Overview

• Brand : Tnfeeon
• Compatible Devices : Laptop
• Connector Type : usb_2_0
• Number of Items : 1
• Specification: Condition: Brand New Item Type: Bluetooth Audio Cable Material: ABS Color: As picture shown Bluetooth Version: 5.0 (compatible with the Following Versions) Product Voltage: 5-12v Applicable : Fit for Gl1800 Goldwing Installation : Before installation, Please read this manual carefully. 2.1 Installation Preparation 1. This product operates on a vehicle with 12 volt or 5 volt DC negative ground system. Do not use it on other voltage system. 2. This product only fits OEM or aftermarket car stereo with CD changer port and different solutions of Bluetooth adapter would be adopted according to different brands of vehicles or different car radios. 3. Make sure car stereo is powered off before installation. Otherwise the car stereo may be damaged. It is suggested to install it a car dealer shop or professional car stereo store. 4. Usually, the car stereo needs to be removed so as to plug Bluetooth kit main connector into CD changer port on radio pack. For some car , Bluetooth kit can be installed in glove box or trunk where external CD changer port is located. 5. Please read the car stereo wiring diagram carefully before installation (normally on the top side of car stereo). Check and confirm where are the following ports on back of the stereo:CD changer port, B+/Ub+/12V ACC port(different car stereos has different names. such as: BAT, +,B-U,MEM +12, KL.30) and GND port. 2.2 Installation Steps: 1. Turn off car engine and remove key from ignition, if car radio uses a security codes, make sure that you have the codes before unplugging the radio. 2. Unmount the radio from the order to get access to the back side of the radio, and find CD Changer port at the back of the radio. For details of unmount, please refer to car user manual or car stereo manual, or ask professional staff to unmount the radio. 3. Connect wire harness to car stereo radio module unit in advance. Be