2.2FT Jumper Cable Adapter Compatible with Milwaukee M18 Batteries

About This

• Product Specifications:Wire:8Awg flexible silicone wire,tinned copper,resistant temperatures up to 200℃,Adapter material: ABS plastic, nickel plated metal conductive sheet,specially designed to be compatible with Milwaukee M18 batteries, Alligator clamps: ABS plastic handle,1mm thick copper aggressive teeth,strong springs,Product Length:2.2FT
• Product Usage 1:It’s a quick way to turn a tool battery into a portable power source. easy to power small projects Things like LED light bars, test lights, and random electronics that can run on 18V voltage
• Product Usage 2: In emergency situations Jump starting a Dead or Weak Battery. For Trucks, Suvs, Full-Size Cars, Mid-Size Cars And Small/Compact Cars,Do not use it directly to start a modern car. Firstly, you need to disconnect the connection cable between the vehicle battery and electronic devices, then use it to charge the car battery for a while, and then reinstall the battery onto the vehicle and start the vehicle
• Perfectly compatible with Milwaukee M18,such as:48-11-1815, 48-11-1820, 48-11-1828, 48-11-1840, 48-11-1850, etc.
• Easy to use:Just push adapter into the battery groove , and ensure it's locked onto,Ensure the battery has enough power to power the device,If the battery voltage is too low, using this adapter may damage your battery,The red clamp is connected to the positive pole (+) of the battery, and the black is connected to the negative pole (-). DO NOT connect wrong (Battery not included)
• The adapter is only designed for power output,and no voltage regulation,no low voltage protection.there are no fuse or circuitry to prevent any kind of overload or surge coming back into.This is a direct connection adapter without a switch,

Overview

• Product Specifications : Wire:8Awg flexible silicone wire,tinned copper,resistant temperatures up to 200℃,Adapter material: ABS plastic, nickel plated metal conductive sheet,specially designed to be compatible with Milwaukee M18 batteries, Alligator clamps: ABS plastic handle,1mm thick copper aggressive teeth,strong springs,Product Length:2.2FT
• Product Usage 1 : It’s a quick way to turn a tool battery into a portable power source. easy to power small projects Things like LED light bars, test lights, and random electronics that can run on 18V voltage
• Product Usage 2 : In emergency situations Jump starting a Dead or Weak Battery. For Trucks, Suvs, Full-Size Cars, Mid-Size Cars And Small/Compact Cars,Do not use it directly to start a modern car. Firstly, you need to disconnect the connection cable between the vehicle battery and electronic devices, then use it to charge the car battery for a while, and then reinstall the battery onto the vehicle and start the vehicle
• Perfectly compatible with Milwaukee M18,such as : 48-11-1815, 48-11-1820, 48-11-1828, 48-11-1840, 48-11-1850, etc.
• Easy to use : Just push adapter into the battery groove , and ensure it's locked onto,Ensure the battery has enough power to power the device,If the battery voltage is too low, using this adapter may damage your battery,The red clamp is connected to the positive pole (+) of the battery, and the black is connected to the negative pole (-). DO NOT connect wrong (Battery not included)