VIOFO HK4 Hardwire Kit with 8pcs Full Set Circuit Fuse Tap, Type-C Port, for A329 series/A229 series/A119Mini2/A139Pro/WM1/T130 Dash Cam

About This

• 24 Hours Parking SurveillanceWhen the engine is off, HK4 hardwire kit provides continuous power to the camera, any collisions, event will be recorded.
• Low Voltage ProtectionHK4 hardwire lets you set a voltage cut-off value with 4 options, when the voltage of vehicle’s battery drops to the cut-off value, it will stop powering your dashcam, thus protecting your battery from discharge.
• Automatically switch parking modeWith ACC detection, the dash cam will switch to parking mode automatically if the vehicle engine is off. The dash cam will switch into normal recording when the vehicle engine is on.
• 12 / 24V CompatibleHK4 ACC Hardwire kits connects the camera directly to the car, truck, bus, SUVs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
• The hardwire cable length is 13.1ft (4m). The red battery cable should be connected to constant power. The ACC yellow cable should be connected to ignition. The Ground cable should be connected to vehicle body.
• NOTE: You need to prepare 2pcs fuse tap to work with the hardwire cable. HK4 hardwire kit is for VIOFO A329S/A229Plus/A229Pro/A119Mini 2/A139Pro/WM1/T130 dash cam, ISN'T compatible with other series of our dash camera.

Overview

• Brand : VIOFO
• Model Name : HK4
• Vehicle Service Type : Car, Truck, Bus, Van, Minivan
• Connectivity Technology : USB Type-C
• Special Feature : Low Voltage Protection, 24 Hours Parking Surveillance, Automatically switch parking mode
• Video Capture Resolution : 1080p
• Color : HK4 Hardwire Kit
• Auto Part Position : Front
• Compatible Devices : VIOFO A329 series, A229 series, A119Mini2, A139Pro, WM1, T130
• Number of Items : 1
• Camera stops when engine is off
• The yellow ACC wire senses ignition status to switch between driving and parking mode. If the mode doesn’t change, ensure the ACC wire is connected to an ignition-triggered circuit and parking mode is enabled on the menu.
• Camera stops unexpectedly during parking mode
• This usually occurs if the battery reaches low-voltage cutoff or the parking timer ends.
• Camera keeps recording after turning off the engine
• Confirm the ACC wire is correctly connected to an accessory circuit (not constant power).
• How to install the dash cam hardwire kit?
• Connect the red wire to a constant power source using a fuse tap. Connect the yellow wire to a circuit that only has power when the ignition is on (ACC). Securely ground the black wire to an unpainted metal point.
• Does hardwire cable have low voltage protection function?
• Yes, the hardwire kit features built-in low-voltage protection. It automatically cuts power to the dash cam when your vehicle's battery drops to 11.8V (for 12V systems) or 24.8V (for 24V systems), preventing battery drain.
• Camera stops when engine is off The yellow ACC wire senses ignition status to switch between driving and parking mode. If the mode doesn’t change, ensure the ACC wire is connected to an ignition-triggered circuit and parking mode is enabled on the menu.
• Camera stops unexpectedly during parking mode This usually occurs if the battery reaches low-voltage cutoff or the parking timer ends.
• Camera keeps recording after turning off the engine Confirm the ACC wire is correctly connected to an accessory circuit (not constant power).