Autel MaxiLink ML519 OBD2 Scanner, AL519 Black New, Mode 6 Car Code Reader

About This

• TURN OFF CHECK ENGINE LIGHTAutel ML519 is an enhanced OBDII scanner that allows you to check all engine related fault codes, figure out check engine light alerts and perform proper repair with the definitions and tips displayed for DTCs and turn off the Malfunction Indicator Light(MIL). The auto diagnostic scanner can locate bad O2 sensors, perform EVAP tests(Mode 8), On-Board Monitor Tests(Mode 6) and component tests, check misfire and fuel system and retrieve vehicle information and etc.
• FULL CAR DIAGNOSISML519 obd2 scanner can perform all 10 modes of obd2 tests like read, clear diagnostic fault codes(DTCs), retrieve Vehicle Info, retrieve readiness status to pass smog check, freeze frame data and live data of multiple sensors in graph to figure out fault causes. Support O2 Sensor and EVAP Test (Mode 8), On-Board Monitor Test (Mode 6), let you initiate a leak test for the vehicle’s EVAP system, identify trouble shooting related to fuel efficiency and vehicle em~issions.
• PATENTED ONE-CLICK I/M READINESS FUNCTIONLooking for a scanner that can tell you if if your car is “Ready” for a smog test? No need the expensive scanner. The the most cost effective Autel ML519 can help you solve the problem. Don’t waste money on a failed smog test! ML519 can retrieve I/M Readiness status to make sure OBD2 monitors on your car are “Ready”, monitors like misfire, fuel, catalyst, O2 sensors, EVAP, etc, to help you pass the annual smog check.
• ACCURATE FAST AND EASY TO USEThe ML519 OBDII scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, and reads and clears engine trouble codes in seconds. If you want to find out the cause of the check engine light, this device will let you know immediately and fix the problem right away without any car knowledge. Plug-and-Play. No batteries or apps are needed for super ease of use!
• UNMATCHED OBDII VEHICLE COVERAGEAutel ML519 car diagnostic scanner supports all OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN. AL519 car diagnostic tool is compatible with all obdii-compliant vehicles: sedans, SUVs and light trucks post 1996 in US, post-2006 for EU-based and post 2009 for Asia-based cars.
• USER-FRIENDLY DESIGNHand-size body with 24”+ heavy duty OBD2 cable, no longer need to bent over the entire repair time to read the display. Just plug in, then sit in the driver’s seat in comfort while scanning. Durable thick rubber case, let you have a sturdy and compact scanner, no longer worried about falling to the ground. Equipped with a large LCD display (320x240 pixels) to indicate test results directly and the user interface is really slick & easy to read on the color screen

Overview

• Brand : Autel
• Power Source : Corded Electric
• Operating System : Android 4.4
• Screen Size : 24 inches
• Language : English
• >>> As One of The Best-selling OBD2 Scanner on the Market , ML519/AL519 has received positive feedback from More than Million customers worldwide. Multifunctional design has helped million customers diagnose many falts and Saved Hundreds of Bucks!!
• "I really needed an obd that could tell me if my car was ready for testing by the state; this did the trick; The I/M button gives you a fast single-screen view of readiness monitors for state mandated smog tests, the monitors either have a green check for ready or a red X for not ready"
• "It saved me so much money being able to know what I was dealing with and I didnt have to go to the dealer to have the light go off. btw the dealer wanted 150 USD to have that done. Since i got it, Ive been able to help a few friends also. Definately worth the pri ce and more. I highly reccomend it."
• ''A code popped up and it totally helped me to figure out what is wrong. I was able to buy the part and replace it myself. No 100 USD an hour for labor.''
• ''The device feels solid in your hand (does not feel cheap) and I like the rubber bumper which protects the unit from accidental drops.''
• ''Excellent form factor, rugged, bright color display, intuitive menus and navigation, very good instructions, excellent value.''
• >>>Highlights you should know about, ML519/AL519 makes professional technologies available to you - at an affordable pri c e!
• #1. Gas Cap #2. Air Fuel Ratio Sensor #3. Mass Air Flow Sensor #4. Ignition Coils #5. Spark Plug Wires #6. Spark Plugs #7. Thermostat #8. E-G-R Valve #9. Evaporatative Em~ission Canister Purge Valve(EVAP) #10. Catalytic Converter.
• This auto code reader will read codes indicating these fault parts, and tell you what’s wrong with your car engine, and then erase these trouble codes and turn off check engine light. Get this Autel ML519/AL519 car diagnostic scan tool will save you much time and money.
• Autel ML519/AL519 is the answer!! I/M Reading determine if your vehicle is ready for a smog test, Quick State Em~issions readiness check, and drive cycle verification.
• OBD II regulations set by the (Society of Automotive Engineers) SAE require vehicles monitors and tests on the oxygen (O2) sensors to identify problems related to fuel efficiency and vehicle em~issions. With ML519/AL519, you can check that various em~issions-related components or systems on your vehicle are working properly and make sure the monitor is ready for smoke testing . If not, please fix it before the smog test to successfully pass the test and avoid fines. Therefore, have your vehicle checked before the annual smog check.
• NOTE: The O2 Monitor Test function is not supported by vehicles that communicate using a controller area network (CAN).
• The On-Board Monitor Test for non-CAN-equipped vehicles retrieves and displays test results for em~ission-related power train components and systems that are not continuously monitored.
• The On-Board Monitor Test for CAN-equipped vehicles retrieves and displays test results for em~ission-related power train components and systems that are and are not continuously monitored.
• The scan tool allows access to the results of on-board diagnostic monitoring tests for specific components/systems. Besides, the advanced feature of this scan tool enables you to read the definition of an On-Board Diagnostic Monitor ID.
• EVAP(fuel evaporation system) allows initiating a leak test for the vehicle’s EVAP system, and detect EVAP data so that you can know the fuel consumption of the car at any time.
• Note: Some vehicles do not allow scan tools to control vehicle systems or components. If the vehicle under test does not support the EVAP Leak Test, an advisory message is displayed on the screen.